Eizo RadiForcee GX240 21,3
![]()
|
TECHNICAL DATA:
- Cabinet Color: Black
- Panel:54 cm (21.3") TFT Monochrome LCD Panel (IPS)
- Active Display Size (H x V): 324.0 x 432.0 mm
- Viewable Image Size Diagonal: 541 mm
- Native Resolution: 1200 x 1600
- Pixel Pitch: 0.270 x 0.270 mm
- Grayscale Tones :1,024 from a palette of 8,161 tones
- Viewing Angles (H, V): 170°, 170°
- Brightness: 1000 cd/m2
- Recommended Brightness for Calibration 500 cd/m2
- Contrast Ratio: 850:1
- On/Off Response Time: 23 ms (typical)
- Scanning Frequency (H, V): 31 - 100 kHz, 48 - 71.5 Hz (VGA Text: 69 - 71 Hz)
- Frame synchronous mode: 59 - 61 Hz
- Dot Clock 165 MHz
- Input Signals: DVI Standard 1.0
- Input Terminal: DVI-D 24 pin
- USB Ports: 1 upstream, 2 downstream
- USB Standard: Standard Rev. 2.0
- Power Requirements: AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
- Power Consumption: 100 watts
- Power Save Mode: Less than 3 watts
- Sensor: Built-In Swing Sensor / Backlight Sensor
- Power Management: DVI DMPM
- OSD Languages: English, French, German, Italian, Japanese, Simplified Chinese, Spanish, Swedish, Traditional Chinese
- Net Weight With Stand: 10.8 kg
- Without Stand: 7.8 kg
- Hole Spacing: VESA standard 100 x 100 mm
- Certifications and Standards CE (Medical Device Directive), TÜV/GM (EN60601-1), cTÜVus (UL 60601-1, CSA C22.2 No. 601-1), CB (IEC60601-1), VCCI-B, FCC-B, Canadian ICES-003-B, c-Tick, FDA 510(k)*, CCC, RoHS
- Supplied Accessories AC power cord, user's manual, signal cable (DVI-D ~ DVI-D), USB cable, EIZO LCD Utility Disk (RadiCS LE, ScreenManager Pro for Medical software), ScreenCleaner, warranty card
- Warranty: Five Years
- Display of mammography images for diagnosis is not supported.
|
Built-In Swing Sensor
Built-in swing sensor is conveniently enabled and visible only when remote quality control operations such as calibration are being performed. Compatible with RadiCS and RadiNET Pro versions 2.5.0 and later.
10-Bit Simultaneous Grayscale Display
10-bit (1,024 tones) from a 13-bit look-up table (8,161 tones) can be displayed simultaneously for high-definition medical imaging. 10-bit graphics board and 10-bit viewer software needed for 10-bit display
Image Rotation
The Image Rotation function offers hardware-based switching between portrait and landscape mode. This eliminates the need for special software and does not compromise graphics performance.
Calibration Mode Selection
Selectable with the front panel button, the CAL Switch function offers various calibration modes for different modalities such as
CR, CT, and endoscope images.
DUE for Brightness Uniformity
The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors.
Print
